ขอทราบวิธี แฟช cloud ibox
1, the software download to the USB to one folder named vuplus, the folder name must be vuplus because the receiver only read vuplus file.
2, put the USB to the receiver, power on, the receiver will read the USB and update, wait, until the blue light flashing.
3, after the blue light flashing, power off the receiver and take off the USB.
4, power on again and start the receiver.
ข้อความข้างต้น ผม copy มาจากอีเมล์ ซึ่งเพื่อนคนจีนส่งมาให้เมื่อวันก่อน (แต่วิธีการเหล่านี้ ผมทำเป็นเมื่อหลายเดือนก่อน)
เรียนรู้จากข้อมูลด้านล่าง ซึ่งเจอในเวปบอร์ด (แตกต่างกันเรื่อง สีของไฟ)
How to update VU solo by USB
Extract the downloaded file to a folder on our computer.
Inside the compressed archive will be present the following three files:
1.root_cfe_auto.jffs2
2.kernel_cfe_auto.bin
3.boot_cfe_auto.jffs2
The USB key must create a specific directory:
The files go in a vuplus/solo/ directory the root of the USB stick. You then put the USB stick in the front USB port on the SOLO, then turn on mains power and you should get:
ORANGE/RED LIGHT (CONSTANT) IN ROUND DISPLAY WINDOW - LED LIGHT FLASHING ON USB STICK (if yours has an LED)
after a min or two you'll then get
ORANGE/RED LIGHT FLASH IN ROUND DISPLAY WINDOW - NO FLASHING LED ON USB STICK
then just a short while later
GREEN LED FLASHING IN ROUND DISPLAY WINDOW - NO FLASHING LED ON USB
That's it, you can now remove the USB stick and turn the mains power off then back on. Once you turn the power back on again the green LED in the display window should be constant and it'll just be a black screen on the TV, you must wait a good while now, longer than you'd imagine, then eventually the VU+ setup wizard screen will appear and you are good to go!
Seems fairly obvious really